New salable low energy consumption lights of  LED PAR 56 bulb 

LED bulb,to instead of traditional filament  lamp, is a kind of new modern energy lighting.

  With the rapid development of LED Technology, to come true the aim of new modern green lighting, LED lighting has become a prefer choice. Why? Because in luminescence principle aspect, energy and environmental protection aspect, LED products is much superior to many traditional lighting products.

   In daily life, filament lamp and electronic energy-saving lamp are also occupy a very high proportion, so in order to reduce waste, just like other LED manufacturer, RONGHUA develops lighting products that conform to the existing interface and people used to use, it uses the existing interface mode, such as use screw bulb or socket bulb, just like E26, E27, E14, B22 and so on. For meeting the people’s habits, imitated the shape of filament lamp, and changed the lamp structure, basically it is made of three parts: LED sources, driving circuit, heat abstractor. Those parts create a low energy consumption, long life, high luminous efficiency and environmental protection product,  LED bulb PAR56.

Product features

1. Convenience of install and use

  You could direct replace the same energy lamp or ordinary bulb, such as E27,E14, GU10 and B22 or other PAR lamp holder, even do not to make any changes, and you never ask for any technicians or professional people , first please read our instruction carefully, you could DIY and change the ordinary lighting to become LED lighting.

2. Safety

  Ordinary energy-saving lamp operating temperature will be around 60-80℃,ordinary filament lamp is more higher, about around 80-120℃.If you careless, you will hurt your hand or skin.

  But LED bulb PAR56 use LED chips, and it have a structure of professional heat abstractor, when it working, the temperature is lower, just about 40℃ to 60 ℃，it will be much safer in our daily life.

   Meanwhile, the use of energy-saving lamps and ordinary filament lamp products are glass, if it is a collision with other hard objects, it will cause permanent damage and cannot be used anymore and easy to cut by glass. 

  The LED bulb PAR56 use professional material, the body uses PC or acrylic casting material, the LED source uses special material for seismic resistance, (lens parts uses the most advanced technology —soft lens technology), the lampshade is acrylic material, even if broken is not easy to cut your hands.

3. Low energy consumption

  Common lamp products’ input voltage is about 20w to 100w. But LED bulb use LED chips for sources, the input voltage could be around 0.8w to 12w, it could replace 15W-100W common lamp. Obviously, comparison with the ordinary light bulb and energy-saving lamp, LED bulb PAR56 power can reach 1:10.

    LED bulb PAR56 uses LED chips for sources, when it working, there is no IR (IR) component in the spectrum, and the overall structure adopts professional design of the heat dissipation structure, normal working temperature is around 40-60℃，even uses more frequently, the temperature is more lower than ordinary light bulb and energy-saving lamp, power consumption is greatly reduced, save much money, increase service life. 

4. Long lifetime 

  The lifetime of ordinary lamp and energy lamp are about 1000 hours and 8000 hours. (as per working 4 hours for every day).

Add it all up, RONGHUA’s new products LED bulb PAR 56 is your better choice.

Any inquiry  information of the LED lights you need could  contact  us about:NINGBO RONGHUA INDUSTRY CO., LTD.

Add: Room 1108,New World Commercial Building,No 1018 Min'An Road,Ningbo China.

Tel:(86) 574 87361535,13857898923.

Fax:(86) 574 87361537.

Mobile: 0086-13857898923                 

E-mail: andylu@rhlight.com;87361535@163.com

http://www.rhlightec.com or  www.rhlight.com

Skype: andylu1973